Welcome to Department of @ NIT, Manipur
  • Dr. Anil Kumar Birru
  • Assistant Professor
  • Mechanical Engineering
  • Email : anilbirru@nitmanipur.ac.in

Academic Information
  • Ph.D. obtained from Indian Institute of Technology, Roorkee, India.

Branch: Mechanical and Industrial Engineering with specialization in Manufacturing in the year 2013.

Title of Ph.D. thesis: “Some studies on Fluidity and Hot Tearing of Aluminum Cast alloys”

  • M.Tech obtained from Shri. G.S.I.T.S, Indore (M.P), India.

Branch:  Industrial and Production Engg. Dept., specialization in Industrial Engg., and Management. June 2008.

  • B.Tech obtained from V.R. Siddharta Engg., Collage, from Vijayawada, A.P India.

Branch: Production Engineering. June 2005.

Paper Published

list of Publications, Seminars, Workshops:

Referred Journals:

  1. A.K. Birru, M.M. Mahapatra, D.B. Karunakar and Pradeep Kumar, “A study on fluidity and hot-tearing of A206, A518 and A713 cast alloys”, Indian Foundry Journal, Vol. 57 (2011), pp. 38-45. ISSN : 1073-5623
  2. A.K. Birru, D. Benny Karunakar,  M.M. Mahapatra ,Fluidity of A713 Cast Alloy with and without Scrap Addition using Double Spiral Fluidity Test: A Comparison”, International Journal on Mechanical and Aerospace, Vol. 6. (2012), pp-92-96. ISSN: 2010-3786.
  3. A. K. Birru, , D. Benny Karunakar,  M. M. Mahapatra, “A study on the hot tearing susceptibility of Al-Cu, Al-Mg and Al-Zn alloys”, Transactions of the Indian Institute of Metals, Vol. 65, No.1 (2012), pp. 97-105.  ISSN: 0972-2815.
  4. Chintala Venkateswarlu, A.K. Birru, “Integrated Quality Function Deployment as a Tool for quality Achievement in a Health Care”, International Journal of Applied Industrial Engineering (IJAIE), Vol. 1 (2012), pp. 80-92.  ISSN: 2155-4153.
  5. Chintala Venkateswarlu, Birru A.K., “AHP-QFD frame work for a Health care service Quality”,   International e-Journal of Business Review and Manufacturing Management (IJBRMM), Vol.1 (2011), pp- 8-16 ISSN 2231-5349.
  6. Chintala Venkateswarlu, A.K. Birru, “Cascade of three phased QFD integrated with AHP”, Industrial Engineering Journal Industrial Engineering Journal, Vol. 5 (2012), pp.7-10.  ISSN 0970-2555
  7. A. K. Birru, P. Uday bhanu, V. Chintala, “Knowledge management approach to enhancement the productivity”, Industrial Engineering Journal. Vol. 6 (2013), pp- 7to8. ISSN 0970-2555

 

Referred International Conferences:

 

  1. A. K. Birru, M. M. Mahapatr, D. Benny Karunakar and Pradeep Kumar, “Exploration of crack initiation during hot tearing in A206 and A713 alloys”, 59th  Indian Foundry Congress, IIF Transactions, (2011), pp- 344-362.
  2. A.K. Birru, S. Belete, V. Chinatala, M.M. Mahapatra, D.B. Karunakar, and P. Kumar, A Study on A713 Alloy and A40E Alloy by Double Spiral Fluidity test: Comparison, Proceedings of the 5th International Conference on Advances in Mechanical Engineering (ICAME-2011) pp. 815-818.
  3. A.K. Birru, Appa Rao Chinna, V. Chintala and G. Kranthi Kumar, “Knowledge Management Approach to   Enhancement the Productivity of M.C.V Knuckle in Casting Industry “, Proceeding of 1st International Conference on Advance Research and Innovations in Mechanical and Industrial Engineering (ICARIMMIEM-2014.) pp-20-21.
  4. K. Chinna Apparao and Anil Kumar.Birru, “Enhancement of Customer Satisfaction by QFD in Metro-Taxi Service”, Proceeding of 1st International Conference on Advance Research and Innovations in Mechanical and Industrial Engineering (ICARIMMIEM-2014.),  pp- 202-205.
  5. G. Kranthi Kumar and B. Praveen Kumar, P. Vara Laxmi and Anil Kumar Birru,  A Study on Thermal Conductivity of Hybrid  Composite Material with Reinforcement of   Coconut Coir” Proceeding of 1st  International Conference on Advance Research and Innovations in Mechanical and Industrial Engineering (ICARIMMIEM-2014.), pp-243-246. 

 

 Referred National Conferences:  

 

  1. Anil Kumar Birru, “Productivity Enhancement by using the Industrial Engineering tool’s, National conference on System thinking& system Dynamics Society of India (NCSD 2008) organized by Mechanical Department, ITBHU, Varanasi, UP. 2008.
  2. Anil Kumar Birru, Chintala Venkateswarlu, “Bench Marking in Competitive Industrial  Environment”, National conference on Recent Developments& Futuristic Trends in Mechanical Engineering, organized by Department of Mechanical Engineering, ShriRam Collage of Engineering & Management, M.P. 2007.
  3. Chintala Venkateswarlu, Anil Kumar Birru, “Lean Manufacturing Implementation in an Education institute and in a Hospital”, National conference on Recent Developments& Futuristic Trends in Mechanical Engineering, organized by Department of Mechanical Engineering, ShriRam Collage of Engineering & Management, M.P. 2007.

 

National Level Paper Presentations:

1) Anil Kumar Birru,  “Laser Welding”, National Level Techenical Symposium, organized by Department of Mechanical Engineering, Annamacharya Institute of Technology and Science, Rajampet. A.P. 2004 (Secured III Prize in Presentation)

2) Anil Kumar Birru, “Design of Work cell for Agile Manufacturing”, National Level Technical Symposium, organized V.R. Siddhartha Engineering collage, Vijayawada, A.P. 2004.

3) Anil Kumar Birru, “Non Conventional Source of Energy (Solar Pond)”, National Level Technical Symposium, organized V.R. Siddhartha Engineering collage, Vijayawada, A.P. 2003.

Seminars:

1) Anil Kumar Birru, “Inventory Control, ABC Analysis”, Organized by Department of Mechanical Engineering, V.R. Siddhartha Engineering collage, Vijayawada, A.P. 2003-2004. (Secured II Prize in Presentation)

2) Anil Kumar Birru, “A special talk on Mother Teresa”, Organized by  Department of Mechanical Engineering, V.R. Siddhartha Engineering collage, Vijayawada, A.P. 2003-2004. (Secured III Prize in Presentation)

Work Shops Attended:

1) Anil Kumar Birru, has Participated in Institutional Training Programme held on 13th Sep. 2004, Organized by Department of Mechanical & Electrical Engineering, V.R. Siddhartha Engineering collage, Vijayawada in Collaboration with Petrol Conservation Research Association, Visakhapatnam, Andhra pradesh-India.

2) Anil Kumar Birru, has Participated in work shop on “Outcomes Based Engineering Education for Enhanced Employability”) held on 21st  September, 2013, Organized by Department of Metallurgical and Materials Engineering, National Institute of Technology Warangal, Andhra Pradesh-India.

3) Anil Kumar Birru, has Participated in work shop on Advances in Electron Microscope (AEM-2014) held on 09-13th December, 2013, Organized by Department of Metallurgical and Materials Engineering, National Institute of Technology Warangal, Andhra Pradesh-India.

4) Anil Kumar Birru, has Participated in work shop on Friction Stir Welding, NDT and Optimization held on 09-11th January, 2014, Organized by Department of Metallurgical and Materials Engineering, National Institute of Technology Warangal, Andhra Pradesh-India.

Project Information

Projects guided at ug level

  1. Title of the Thesis “Modified Chute Design and Remedial Measures of Shuttle Conveyor CO-63”, Submitted for fulfillment of B. Tech Degree. JNTU Hyderabad.
  2. Title of the Thesis “Grain Refinement of ZA27 Zinc alloys With Addition of Alumina and Fly Ash”, Submitted for fulfillment of B. Tech Degree. JNTU Hyderabad.
  3. Title of the Thesis, “A Study on Mechanical Properties of Silica Scand with addition of Molasis and Fly Ash”, Submitted for fulfillment of B. Tech Degree. JNTU Hyderabad.
Other Activity Information

ABROAD VISITS:

Visited Zurich, Switzerland during Jan. 2012 and presented a research paper at World Academy of Science and Engineering and Technology. funded by Deartment of Science and Technology.

Conference and Workshop Organized:

Convener for 1st National Work Shop on Advance Composite Materials (ACM-2013) Optimization held on 09-11th January, 2013, in Associate with Department of Mechanical Engineering and Indian Society for Technology and Science. 

Convener for 1st International Conference on Advance Research and Innovations in Mechanical and Industrial Engineering (ICARIMMIEM-2014.) Optimization held on 06-07th January, 2014, in Associate with Department of Mechanical Engineering and Indian Society for Technology and Science.

 Event Organizer for SPARK-14 (Culture Festival) organized by Christu Jyothi Institute of Technology & Science, held on 31st January-1 February 2014.