Welcome to Department of

Year 2020-22

  1. Prabhat Kumar, Desh Deepak Verma, Rajveer Bose; "Dynamic Vibrational Analysis of an Unbalanced Jeffcott Rotor Supported by Foil Bearings and Conventional Bearings"; 2nd International Conference on Advances in Mechanical Engineering and Nanotechnology;27-28th February 2020;(ICAMEN 2020); Manipal University, Jaipur, India.

Year 2017-19

  1. Bikram Kumar Pani and Dushyant Singh, Numerical Study on Slot Mist Jet Impingement Cooling on a Flat Plate, Proceedings of 12th International Conference on Thermal Engineering: Theory and Applications, Gandhinagar, India.
  2. Jishnu Handique and Dushyant Singh, Slot Mist Jet Impingement cooling on a cylindrical surface, Proceedings of 12th International Conference on Thermal Engineering: Theory and Applications, Gandhinagar, India.
  3. Chunkyraj Khangembam and Dushyant Singh, Experimental study of two-phase air-water mist jet impingement cooling on cylinder. Proceedings of the Third International Conference on Sustainable Energy and Environmental Challenges (3rd 18 –21 Dec., 2018, IIT Roorkee, India, (072) PP 349-353, 2018
  4. Rahul Mondal and Dushyant Singh, Numerical Study on Single Slot Jet Impingement on Hemispherical Convex Dimple Surface Using ANSYS Fluent, Proceedings of 12th International Conference on Thermal Engineering: Theory and Applications, Gandhinagar, India.
  5. Ketan A. Ganatra and Dushyant Singh, Comparison of the original and the modified V2f model for impinging round jet cooling from a cylinder. Proceedings of the Third International Conference on Sustainable Energy and Environmental Challenges (3rd 18 –21 Dec., 2018, IIT Roorkee, India (084) PP 396-399, 2018.
  6. Mekrisuh K U, Dushyant Singh and Udayraj, Numerical analysis of effect of aspect ratio and flow rate on the performance of PCM based thermal based thermal energy storage system. Proceedings of the Third International Conference on Sustainable Energy and Environmental Challenges (3rd 18 –21 Dec., 2018, IIT Roorkee, India (066) PP 328-331, 2018.
  7. Vikash Kumar Singh Chauhan and Dushyant Singh, “Numerical study of mist jet impingement cooling of an isothermal flat plate at low superheat” International Conference on Sustainable Energy & Environmental Challenges(SEEC-2018)- pp. 528 – 531; 2018.
  8. Ketan A. Ganatra and Dushyant Singh, “Numerical investigation on air slot jet impingement cooling over a cylinder” Fifth International Conference on Computational Methods for Thermal Problems (THERMACOMP2018), July 9-11; pp. 404 – 408; 2018.
  9. Anuj Kumar and Dushyant Singh, “Numerical study of inclined air jet impingement cooling of a cylinder” Fifth International Conference on Computational Methods for Thermal Problems (THERMACOMP2018), July 9-11; pp. 140 – 144; 2018
  10. Joseph Issac and Dushyant Singh, “Numerical study on slot jet impingement using OpenFOAM and ANSYS FLUENT” Fifth International Conference on Computational Methods for Thermal Problems (THERMACOMP2018), July 9-11; pp. 370 – 374; 2018.
  11. Arvind Kumar Sahu, Shobha Lata Sinha, Tikendra Nath Verma; Numerical Simulation Method to Predict Air Flow and Contaminant Control in a Multiple Bed Intensive Care Unit of Hospital; 1st International Conference on Biomedical Engineering Science and Technology: Roadway from Laboratory to Market (ICBEST 2018) 28th -29th July 2018, NIT Raipur.
  12. Tikendra Nath Verma, Moon Banerjee, Prerana Nashine; Numerical Study of a Solar Air Heater Duct Absorber Plate with Different Rib Geometry; Emerging Trends in Manufacturing & Automation Engineering (NCMAE); 12 October 2018; Amity University, Gwalior (M.P.).
  13. Upendra Rajak, Tikendra Nath Verma; Exhaust emissions and combustion performance analysis using Diesel-biodiesel in a diesel engine International Conference on Advance in Design, Materials, Manufacturing & Energy Systems (ADMMES); 15 September 2018; Malla Reddy Engineering Collage, Secundrabad.
  14. K Ch Apparao1 and Anil Kumar Birru, “Grain refinement of Al-Si9.8-Cu3.4 alloy by novel Al-3.5FeNb- 1.5C master alloy and its effect on mechanical properties”, IOP Conference Series: Materials Science and Engineering, Published by:IOP Conf. Series: Materials Science and Engineering Vol.303 (2018) pp.1-6. Got best presentation Award in 2017, University of Malaya, Malaysia.
  15. H.N Singh, Thokchom Subhaschandra Singh and T.N Verma (2018) Experimental study of biogas production using starch rich food waste at pilot scale. International Conference on Advances in Manufacturing, Materials & Energy Engineering, ICAMME, MITE Mangalore, Karnataka & Binghamton University, New York, 02-03/03/2018.
  16. Maibam Bindya Devi and Anil Kumar Birru, Influence of Alumina and Bamboo Leaf Ash on Hybrid Aluminium Matrix Composite,ICRAMMT 2018.
  17. Prabhat Kumar, Vikas Kumar, Kundan Kumar, Lakhan Singh Meena (2019); "Unbalance and dynamic parameters estimation in a rigid rotor mounted on active magnetic bearings"; International Conference on Applied Mechanical Engineering Research; 2-4th May; (IC-AMER 2019); NIT Warangal.
  18. Prabhat Kumar and Rajiv Tiwari (2019); "Dynamic Response Analysis of an Unbalanced and Misaligned Rotor Supported on Active Magnetic Bearings and Touchdown Bearings"; Sixth National Symposium on Rotor Dynamics; 2-3rd July; (NSRD-2019); CSIR-National Aerospace Laboratories, Bangalore.
  19. Prabhat Kumar and Rajiv Tiwari; "A Numerical Study on the Effect of Unbalance and Misalignment Fault Parameters in a Rigid Rotor Levitated by Active Magnetic Bearings"; Proceedings of the 2019 Gas Turbine India Conference (ASME GTINDIA-2019), December 5-6, 2019, IIT Madras, India.

Year 2017-15

  1. T. N. Verma, H. Neeranjan Singh, and P. Nashine, “Investigation of bearing characteristic number by experimental and numerical approach,” 2017 8th Ind. Autom. Electromechanical Eng. Conf. IEMECON 2017, pp. 288–291, 2017.
  2. P. Srinivasa Rao and Anil Kumar Birru, “Effect of Mechanical Properties with Addition of Molasses and Fly Ash in Green Sand Moulding”, ICMPC Materials Today: Proceedings (Published by:Elsevier), Vol.4, 2017, pp-1186-1192.
  3. K. Ch. Apparao And Anil kumarBirru , “Optimization of Die casting Process based on Taguchi approach”, Materialstoday: PROCEEDINGS, (Published by Elsevier), Volume 4, Issue 2, Part A, 2017, Pages 1852-1859
  4. Sameer MD and Anil Kumar Birru, “Multi Response optimization of process parameters in friction stir welding of AA6061 Aluminum alloy using Taguchi Based Grey relations”, International Conference on Composite Materials and Structures, IIT Hyderabad, Proceedings, December 2017,289-299. Published by IIT Hyderabad conference team.
  5. Thokchom Subhaschandra Singh, T.N. Verma and P. Nashine (2017) Analysis of an anaerobic digester using numerical and experimental method for biogas production. 7th International Conference on Material Processing and Characterization, ICMPC-2017, GRIET with MANIT Bhopal, 17-19/03/2017.
  6. Thokchom Subhaschandra Singh and C. Shijagurumayum (2017) Emission from commercial diesel vehicles: A posing hazard to the environment. Recent Advancements in Environmental Research (RAER 2017), Centre for Environment, IIT Guwahati, 05/06/2017.
  7. T.N Verma, P. Nashine and Thokchom Subhaschandra Singh (2017) Numerical simulation of heat transfer characteristics of combined Electro-osmotic and pressure-driven fully developed flow of power-law fluids in micro tubes. 1st NCETMAE-2017, AMITY University, Gwalior, MP, 06/10/2017
  8. Prabhat Kumar, Prerana Nashine, Moon Banerjee, Tikendra Nath Verma (2015); "Numerical & experimental analysis of bearing characteristic number for hydrodynamic journal square bearing"; International Conference on Emerging Trends in Science & Engineering Research; 2-4th December; (ETSER-2015); NIT Manipur.