Biography

Dr. Ashutosh Kumar Singh is presently working as an Assistant Professor in the Department of Mechanical Engineering at NIT Manipur. He received his Bachelors degree in Mechanical Engineering with University GoldMedal in academics from Giani Zail Singh PTU Campus (Formerly Govt Engg College Bathinda ) Bathinda Punjab in 2015, and selected by MHRD for NIT-IIT  Trainee Teacher Scheme in 2016. He did Masters degree in Mechanical Engineering (Specialization: Fluids and Thermal Engineering) from Indian Institute of Technology Guwahati in 2018 and subsequently did  his  Ph.D. from Department of Mechanical Engineering, Indian Institute of Technology Guwahati in 2023. During his doctoral studies, Dr. Singh studied the film cooling for aeroengine afterburner applications. The work was focused developing a suitable injection configurations for afterner corrugated liner. 

Teaching Interests

Heat and Mass Transfer, Turbomachines, Convective Heat Transfer, Experimental Thermal Fluids, Computational Fluid Dynamics (CFD).

Research Interests

Film Cooling, Heat Transfer Fluid Flow, Computational Fluid Dynamics (CFD), Turbulent Flows

Contact Details:

Dr. Ashutosh Kumar Singh

Assistant Professor Grade-II

Department of Mechanical Engineering

National Institute of Technology Manipur

Langol, Imphal-Manipur,795004

E-mails: [email protected], [email protected]

Research Profiles:

Google Scholar: https://scholar.google.co.in/citations?user=znjS16EAAAAJ&hl=en

Research Gate: https://www.researchgate.net/profile/Ashutosh-Singh-68

International Journals (SCI Indexed)

1.  Ashutosh Kumar Singh, Kuldeep Singh, Dushyant Singh, and Niranjan Sahoo. "Effect of Forward and Reverse Injection on Film Cooling and Thermal Stress Distribution of a Corrugated Surface" Numerical Heat Transfer, Part A: Applications, (2024). 

2.  Thanggoulen Hmangte, Dushyant Singh, and Ashutosh Kumar Singh. "Effect of Different Flame Deflectors Plate Geometry on Supersonic Jet Impingement Flow and Heat Characteristics from Rocket Exhaust." Heat Transfer Engineering (2024): 1-12.

3. Gaurav, Raj, Ashutosh Kumar Singh, Kuldeep Singh, and Dushyant Singh. "Experimental and Numerical Investigation of Cylindrical and Shaped Cooling Holes With Forward and Reverse Injection." Heat Transfer Engineering (2024): 1-11.

4. Aishwarya Madhuri, Ashutosh Kumar Singh, Ashish Gupta, Mukul Gupta, and Bibhu Prasad Swain. "Microstructure and corrosion properties of Al1-xWxN coatings for potential use in gas turbine blades." Surface and Coatings Technology 494 (2024): 131311.
   

5. Ashutosh Kumar Singh, Saurabh Kumar, Kuldeep Singh (2023)"Experimental and Numerical Study on the Combined Jet Impingement and Film Cooling of an Aero-Engine Afterburner Section", Aerospace, (2023), 10(7), 589.

6. Ashutosh Kumar Singh, Kuldeep Singh, Dushyant Singh, and Niranjan Sahoo. "Experimental and Numerical Study of the Effect of Double Row Slot Injection Locations on Film Cooling Performance of a Corrugated Surface." Experimental Heat Transfer, (2023): 1-27.

7. Ashutosh Kumar Singh, Kuldeep Singh, Dushyant Singh & Niranjan Sahoo "Experimental and numerical analysis of film cooling performance of a corrugated surface", Experimental Heat Transfer (2022).

8. Hitesh Sharma, Dushyant Singh, and Ashutosh Kumar Singh,"Large Eddy Simulation of Film Cooling Over a Flat Plate in Supersonic Flow." ASME-Journal Thermal Science and Engineering Applications, August 2021; 13(4): 041019. 

9. Ashutosh Kumar Singh, Kuldeep Singh, Dushyant Singh, and Niranjan Sahoo, "Large Eddy Simulations for Film Cooling Assessment of Cylindrical and Laidback Fan-Shaped Holes with Reverse Injection." ASME-Journal Thermal Science and Engineering Applications, June 2021; 13(3): 031027. 

International Conferences 

1. Hitesh Sharma, Dushyant Singh and Ashutosh Kumar Singh, "Large Eddy Simulation of Foreign-Gas Film Cooling in Supersonic Flow", 1^st International Conference on Advancement in Engineering (AES2019), (28-29 September 2019), PID: 071, 2019.

2. Ashutosh Kumar Singh, Dushyant Singh, Niranjan Sahoo“Effect of various deposition configurations on filmcooling characteristics of laidback fan shape hole”. 8 th international symposium on Advances in Computational Heat Transfer – CHT-21 August 15 – 19, 2021,Rio de Janeiro, Brazil.
   

3. Ashutosh Kumar Singh, Kuldeep Singh, Dushyant Singh, "Numerical investigation of flow filed and heat transfer charactristics of corrugated channel." International conference on thermo-fluid and system design. 22-23 March 2022, BIT Mesra, Ranchi.
   

4. Ashutosh Kumar Singh, Kuldeep Singh, Dushyant Singh, Niranjan Sahoo."Film cooling analysis of ammonia based aviation fuels in jet engines" Indo-German International Confrence on metrology for the developtment of green hydrogen and renewable fules in india. 4-6 April 2022. (Virtual Event) Physikalisch-Technische Bundesanstalt (PTB) Bundesalle 100 38116 Braunschweig, Germany. 
   

Book Chapters

1. Hitesh Sharma, Dushyant Singh, and Ashutosh Kumar Singh (2021) Numerical Solution of Foreign-Gas Film Cooling in Supersonic Flow. In: Pandey K., Misra R., Patowari P., Dixit U. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore.  https://doi.org/10.1007/978-981-15-7711-6_79.

EXPERIENCE 

Assistant Professor, Department of Mechanical Engineering, National Institute of Technology Manipur Imphal,September 2023 to till date.

Trainee Teacher, Department of Mechanical Engineering, National Institute of Technology Manipur Imphal, August 2016 to September 2023.

EDUCATION

Doctor of Philoshphy (PhD): Department of Mechanical Engineering Indian Institute of Technology Guwahati (I.I.T Guwahati),Assam, 2023 

Master of Technology (M.Tech-Fluids and Thermal):Department of Mechanical Engineering Indian Institute of Technology Guwahati (I.I.T Guwahati),Assam, 2018

Bachlor of Technlogy (B.Tech-Gold Medalist): Department of Mechanical Engineering GZS PTU Campus Bathinda,Punjab,2015 

Research Project 

1.  Design and Development of 3D printing models, film cooling and vibration analysis for biomedical and aerodynamics applications 

     Funding Agency : DST Government of India 

     Amount (INR): 1cr (100 Lakh)

     Role: Co-PI

Doctoral (PhD) Thesis Supervision 

  M Frankko Singh : Ongoing 

  Md. Irshad Ahamed: Ongoing

Postgraduate Thesis Supervision 

1.Mr. Hitesh Sharma (18207009)

   Topic: Numerical study of film cooling with supersonic flow in rocket engine

   Main Supervisor: Dr. Dushyant Singh ( NIT Manipur)

   Status: Completed in 2020. ( Presently Persuing PhD at IIT Kharagpur)

2.Mr. Ghulam Rabbani (18207005)

  Topic: LES study of turbulent slot jet impingement on flat surface

   Main Supervisor: Dr. Dushyant Singh ( NIT Manipur)

   Status: Completed in 2020. ( Presently Persuing PhD at IIT Delhi)

3.Mr. Sumit Kumar(18207004)

  Topic: Heat transfer study on gas turbine blade

   Main Supervisor: Dr. Dushyant Singh ( NIT Manipur)

   Status: Completed in 2020.( Presently Persuing PhD at IIT Kharagpur)

4. Ubaid Hamid Dar(19207004)

  Topic: Numerical investigation of film cooling

   Co-Supervisor: Dr. Dushyant Singh ( NIT Manipur)

   Status: Completed in 2021.

5. Jairaj Leisangthem(19207005)

  Topic: LES study of turbulent slot jet impingement on flat surface

   Co- Supervisor: Dr. Dushyant Singh ( NIT Manipur)

   Status: Completed in 2021.

6. Ksh Galio Singh (20207008)

  Topic:Numerical analysis of heat sink on wavy fins

   Co- Supervisor: Dr. Dushyant Singh ( NIT Manipur)

   Status: Completed in 2022.

7. Thangjam Seemashwori Devi (21207003)

   Topic:Numerical analysis of heat sink on wavy fins

    Co- Supervisor: Dr. Dushyant Singh ( NIT Manipur)

    Status: Completed in 2023. ( Presently Persuing PhD at NIT Manipur under Vishweshraiya PhD )

8.  AS Khangapam ( 22207003)

     Topic: Numerical Study of Heat Transfer in Ribbed Corrugated Channel

     Co-Supervisor: Dr. Prabhat Kumar ( NIT Manipur)

     Status: Completed 2024

Under Gradugate Thesis Supervision 

 Completed : 04

 Ongoing: 02

Invited Talk

1.  Five days Self Sponsored Workshop on "Numerical Methods in Mechanical Engineering Applications" from 17th March to 21st March 2021 in ME Department, NIT Manipur
2. Five-day short-term course on Fundamentals and applications of CFD in fluid flow and heat transfer problems on fluid flow and heat transfer, 19-24 October 2020, NIT Manipur.
3. One-week short-term course on Introduction of CFD problems on fluid flow and heat transfer, 23-27 November 2020, Mata Vaishno Devi University Katra, J&K.
4. Five days short-term courses on "Advancement in Renewable Energy, Design and Manufacturing" from 30th October to 3rd November 2023 in ME Department NIT Manipur
5. Five days short-term course on "Emerging Aspects in Mechanical Engineering Research and Their Applications" from 29th April to 3rd May 2024 in the ME Department at NIT Manipur
6. Five days short-term course "Sustainable Advancements and Developments in Mechanical Engineering" from 10th June to 14th June 2024 in the ME Department at NIT Manipur

Short Term Course Organised 

1. Organised a 5-day Self Sponsored Workshop on "Numerical Methods in Mechanical Engineering Applications" from 17th March to 21st March 2021 in the ME Department as Coordinator.
2. Organised a 5-day Short Term Course (Under NEP-2020) on "Applications of Vibration and Heat Transfer in Mechanical Engineering" from 27th October to 31st October 2021 in the ME Department as Coordinator.
3. Organised a Workshop (Under NEP-2020) on "Advancement in Renewable Energy, Design and Manufacturing" from 30th October to 3rd November 2023 in the ME Department as Convenor.
4. Organised a 5-day Short Term Course on "Emerging Aspects in Mechanical Engineering Research and Their Applications" from 29th April to 3rd May 2024 in the ME Department as Coordinator.
5. Organised a 5-day Workshop on "Sustainable Advancements and Developments in Mechanical Engineering" from 10th June to 14th June 2024 in ME Department as Coordinator.